Other
Aids for installation and care.
- S630 smoothing aid: prevents sticking to the smoothing trowel – for a perfect result
- S601: tool cleaner and thinner for S316
- S480 thickener: thickens resin so pebbles hold on vertical surfaces
- S700 orange cleaner for care, S750 green remover against moss, algae and lichen
By adding this thickening agent / thickening powder, the resin becomes so viscous that a stone carpet / marble gravel can be troweled onto vertical surfaces.Delivery scope: 1 x 1 kg thickening powder, sufficient to thicken 10 kg of resin.For best results, mix in a closed bucket through a hole in the lid to prevent the fine powder from dispersing.
By adding this adjuster, it can be nested on vertical surfaces. Add to 1 kg of binder 9-10% of substitute 90 -100 g) Delivery 100 g solvent powder in plastic bucket. / €14. 99 Sufficient for the addition of approx. 1 kg of binder.
Special cleaner for cleaning installation and assembly tools & thinner for the binder S316.Packaged in a 1-liter can with an extendable and resealable spout.Cleaning thinner, highly flammablePlease note the hazardous material warnings on the label.Please pay attention to the processing instructions on our data sheets in the customer login.
With this, the professional smoothens, resulting in a perfect outcome. Smoothing aid is an indispensable tool for laying stonecarpet - compatible with binders based on PU and EP. The good surface quality of a stone carpet is ensured only by a consistently clean and well-gliding trowel. The smoothing aid comes in a spray bottle for easy spraying or brushing onto the trowel. After every second to third operation, spray the trowel with smoothing aid (very thinly). The smoothing aid behaves chemically neutral to the binder and therefore is not involved in the curing process. Thus, no stones stick to the trowel, and the stonecarpet can be applied cleanly. The dry and clean trowel is moistened with the smoothing aid at short intervals. Care should be taken not to allow the smoothing aid to come into contact with the substrate to be coated.
With this, the professional smoothens, resulting in a perfect outcome.Smoothing aid is an indispensable tool for laying stonecarpet - compatible with binders based on PU and EP. The good surface quality of a stone carpet is ensured only by a consistently clean and well-gliding trowel. The smoothing aid comes in a spray bottle for easy spraying or brushing onto the trowel.After every second to third operation, spray the trowel with smoothing aid (very thinly). The smoothing aid behaves chemically neutral to the binder and therefore is not involved in the curing process.Thus, no stones stick to the trowel, and the stonecarpet can be applied cleanly. The dry and clean trowel is moistened with the smoothing aid at short intervals. Care should be taken not to allow the smoothing aid to come into contact with the substrate to be coated.
With this, the professional smoothens, resulting in a perfect outcome.Smoothing aid is an indispensable tool for laying stonecarpet - compatible with binders based on PU and EP. The good surface quality of a stone carpet is ensured only by a consistently clean and well-gliding trowel. The smoothing aid comes in a spray bottle for easy spraying or brushing onto the trowel.After every second to third operation, spray the trowel with smoothing aid (very thinly). The smoothing aid behaves chemically neutral to the binder and therefore is not involved in the curing process.Thus, no stones stick to the trowel, and the stonecarpet can be applied cleanly. The dry and clean trowel is moistened with the smoothing aid at short intervals. Care should be taken not to allow the smoothing aid to come into contact with the substrate to be coated.
This smoothes the professional. S630 prevents spinning on the smooth cell. Perfect result. Apply thin film to the smooth cell / spray.
With the natural power of orange, surfaces are not only cleaned but also left with a pleasant, refreshing orange scent.• Very good cleaning performance & material compatibility• For effortless removal of stubborn dirt• Universally applicable and works wonders• Dissolves even the most stubborn dirt such as ballpoint pen ink on textiles, wax, and resin residuesMixing ratio: Cleaner : Water 1:10 to 1:100
Green Remover is a cleaning concentrate for the automatic removal of moss, algae, fungi, lichens, and mold.Green Remover is diluted with water up to 1:10 and applied to the surface to be cleaned using a suitable tool (pump sprayer, sprayer, etc.).Do not rinse the treated area. The effect is based on a long-term action, meaning the product should not be washed away by rain for 6 hours.The effect takes place after 1-3 days.Performance Profile: S750 GREEN REMOVER is a cleaning concentrate for the automatic removal of moss, algae, fungi, lichens, and mold on:Walkways, terraces, stoneware, tiles, ceramics, concrete pool surrounds, asphalt, and natural stone, wood, etc.Roofs made of glass, plastic, bitumen, clay tiles, concrete tiles, sheet metal, and thatchWalls made of clinker, facades, monuments, tombstones, sculptures, high-quality plaster, wood, plastic, and sheet metal coatings.Applying the green remover creates a protective layer that prevents re-infestation by algae, moss, fungi, mold spores, and green deposits.Note:The necessary safety measures when handling chemicals must be observed. Always carry out a test application before first use to test compatibility with the material.