Pore fillers
A closed surface – dirt stays out.
S202 is a clear 1K acrylate pore filler for indoor use only. It is applied with a sponge-rubber trowel or rubber squeegee and closes the small pores between the stones. S208 is a quartz-sand-free terrazzo filler in crystal grey, anthracite and beige – also for outdoor use.
The 1K acrylic pore filler is used to close small pores between the stones and is applied to a completely dry surface using a foam rubber trowel or rubber squeegee.Consumption for grain size 2 - 4 mm: approx. 1 - 1.5 kg per m²Consumption for grain size 4 - 8 mm: approx. 2 - 2.5 kg per m²The product initially has a gel-like, milky appearance and only becomes clear after approximately 1 - 2 days when fully dried.A second coat may only be applied after 48 hours.If the first layer is not completely clear, the second layer must not be applied.Our recommendation:After the first layer has fully dried, apply a second coat.Two thin layers are better than one thick layer and dry significantly faster.Walkable after just 6 hours.The stone texture remains visible after application, as the product sinks slightly.Available packaging sizes: 2.5 kg and 10 kgPlease follow the processing instructions provided in our customer login area.Login details are printed on the invoice or can be requested from us.
The 1K acrylic pore filler is used to close small pores between the stones and is applied to a completely dry surface using a foam rubber trowel or rubber squeegee.Consumption for grain size 2 - 4 mm: approx. 1 - 1.5 kg per m²Consumption for grain size 4 - 8 mm: approx. 2 - 2.5 kg per m²The product initially has a gel-like, milky appearance and only becomes clear after approximately 1 - 2 days when fully dried.A second coat may only be applied after 48 hours.If the first layer is not completely clear, the second layer must not be applied.Our recommendation:After the first layer has fully dried, apply a second coat.Two thin layers are better than one thick layer and dry significantly faster.Walkable after just 6 hours.The stone texture remains visible after application, as the product sinks slightly.Available packaging sizes: 2.5 kg and 10 kgPlease follow the processing instructions provided in our customer login area.Login details are printed on the invoice or can be requested from us.
The diverse product characteristics make the terrazzo filling compound a true all-round talent when it comes to grouting. The quartz sand-free special grout mortar based on cement is fine-grained and therefore perfect for stone carpets.Perfect for stone carpets, stoneware, stone stoneware, porcelain stoneware, glass mosaics, glass tiles, and all natural stones such as Carrara marble, travertine, granite, etc., the terracotta filling compound from SteinSystem is ideal. Thanks to its quick-setting and fast-hardening properties, you can walk on the filled area after just 3 hours. The pores are now waterproof and frost-resistant, making it suitable for both indoor and outdoor use. It is especially effective on demanding substrates, such as underfloor heating, and is frost- and weather-resistant.Mixing: Combine 5 kg of powder with 1 liter of sealing agent and 500 to 1000 ml of water, stirring well. This results in approximately 6.5 - 7kgof total mass. The amount of water added determines the fluid state, workability, and working time. Without water, the product is too thick and difficult to work with.Application: Use a foam rubber trowel to apply the filling compound into the pores, removing excess material. Optionally, you canre-smooth with a sponge board. Allow the filling compound to dry slightly, then smooth it with a damp sponge board using circular motions. Finally, wipe clean with a towel.For added shine, the surface can be rolled over with EP or PU after it has fully dried.If you have any questions, we are always happy to assist you.
The diverse product characteristics make the terrazzo filling compound a true all-round talent when it comes to grouting. The quartz sand-free special grout mortar based on cement is fine-grained and therefore perfect for stone carpets.Perfect for stone carpets, stoneware, stone stoneware, porcelain stoneware, glass mosaics, glass tiles, and all natural stones such as Carrara marble, travertine, granite, etc., the terracotta filling compound from SteinSystem is ideal. Thanks to its quick-setting and fast-hardening properties, you can walk on the filled area after just 3 hours. The pores are now waterproof and frost-resistant, making it suitable for both indoor and outdoor use. It is especially effective on demanding substrates, such as underfloor heating, and is frost- and weather-resistant.Mixing: Combine 5 kg of powder with 1 liter of sealing agent and 350 to 500 ml of water, stirring well. This results in approximately 6.5 kg of total mass. The amount of water added determines the fluid state, workability, and working time. Without water, the product is too thick and difficult to work with.Application: Use a foam rubber trowel to apply the filling compound into the pores, removing excess material. Optionally, you can re-smooth with a sponge board. Allow the filling compound to dry slightly, then smooth it with a damp sponge board using circular motions. Finally, wipe clean with a towel.For added shine, the surface can be rolled over with EP or PU after it has fully dried.If you have any questions, we are always happy to assist you.
The diverse product characteristics make the terrazzo filling compound a true all-round talent when it comes to grouting. The quartz sand-free special grout mortar based on cement is fine-grained and therefore perfect for stone carpets.Perfect for stone carpets, stoneware, stone stoneware, porcelain stoneware, glass mosaics, glass tiles, and all natural stones such as Carrara marble, travertine, granite, etc., the terracotta filling compound from SteinSystem is ideal. Thanks to its quick-setting and fast-hardening properties, you can walk on the filled area after just 3 hours. The pores are now waterproof and frost-resistant, making it suitable for both indoor and outdoor use. It is especially effective on demanding substrates, such as underfloor heating, and is frost- and weather-resistant.Mixing: Combine 5 kg of powder with 1 liter of sealing agent and 350 to 500 ml of water, stirring well. This results in approximately 6.5 kg of total mass. The amount of water added determines the fluid state, workability, and working time. Without water, the product is too thick and difficult to work with.Application: Use a foam rubber trowel to apply the filling compound into the pores, removing excess material. Optionally, you can re-smooth with a sponge board. Allow the filling compound to dry slightly, then smooth it with a damp sponge board using circular motions. Finally, wipe clean with a towel.For added shine, the surface can be rolled over with EP or PU after it has fully dried.If you have any questions, we are always happy to assist you.